Skip to content

Convert Cassettes (or LPs) to MP3 Without Expensive Audio Interface

November 30, 2011

What You Need

Equipment

1. Computer with a sound card. Check that your sound card has a LINE IN jack (generally blue), and ensure that you have the latest drivers for your sound card.

how to convert lp to mp3

2. Cassette Deck/Turntable. This is your audio source. I bought a cassette walkman at Goodwill for $2 that works great.  Whatever you use, the audio source should have RCA line out jacks (red and white) or a headphone jack.

Clean the audio head and pinch roller of your tape deck with a clean cloth dabbed in alcohol. Also, forward and rewind your unused cassettes to remove residual moisture and ensure smooth playback. If using records, wipe them down to reduce clicks.

3. Audio Cable. One or both ends of your cable will be a 1/8″ stereo-mini (2 black lines on the tip). Depending on the jack you use on the audio source, the other end should be either RCA or 1/8″ stereo-mini.

4. Download and install Audacity 1.3

5. Download and install the Lame Encoder. This is required for exporting to MP3 format.

Steps

1. Connect your equipment

Connect the deck’s LINE OUT or PHONES jack to the LINE IN jack on your computer using your audio cable.

2. Setup Audacity

Start Audacity, select Edit-Preferences. In the Audio I/O section, set both playback and recording devices specifically to the sound card in which your cable is plugged.

convert audio cassette to mp3 with Audacity

Start playback from your audio source and adjust the volume level in Audacity. Click the down arrow next to the microphone icon and select Start Monitoring. While playing the loudest part of your audio track, adjust the input level slider on the Mixer Toolbar such that the meters almost reach the right end of the scale. If they actually reach the end such that they “˜hold’, reduce the input level to avoid distortion.

convert lp to digital

3. Record

Create a new project by selecting File-Save Project As. Start recording with the redRecord button and start playback from your audio source. Use the blue Pause button between tracks or sides. When finished, press the yellow Stop button and save your project using File-Save Project.

4. Edit

You will probably have unwanted noise in your recording, such as background hum, tape hiss, or vinyl record clicks. For removing noise, select the beginning of your recording where the playback has started with the hum and hiss, but the music is yet to start. To select, simply use the mouse to click and drag at the start of the track.

Select Effect-Noise Removal, and click Get Noise Profile. Now, select the entire track by choosing Edit-Select-All, and choose Effect-Noise Removal again. Set the Noise Reduction (dB) slider to around 10 to 20 depending upon the level of noise in your source, set the other two sliders in the middle, and click OK. You can review the result by playing the track, using Edit-Undo and trying with different noise samples and slider levels.

Removing Noise

If you are using vinyl records as your input, you may want to try using Effect-Click Removal to remove unwanted clicks. Always feel free to experiment and undo as needed to get the best results. When you are satisfied, use File-Save Project to permanently save your edited track.

5. Export

To export a single audio file, use File-Export As.

Most likely, you will have multiple tracks or songs in your recording, and it makes sense to export them as multiple files. Ensure you have all the tracks recorded, using the Fit Projectbutton on the Edit Toolbar. The number of ‘boxes’ or ‘balloons’ should correspond to the number of tracks. Using the zoom controls, click in the gap between songs, choose Tracks-Add Label at Selection. Name the labels as per your song titles.

how to convert lp to digital

Select File-Export Multiple, choose MP3 Files as the Export format. Click Options to use the built-in presets to select the quality of the MP3. Higher quality produces larger MP3 files. You can repeat the export several times with different options and check the results. You can also specify metadata tags to make it easier to organize your tracks in iTunes.

Export Multiple Tracks

That’s it, you’re done! You can discard those cassettes/LPs or gift them to your Grampa, now that you’ve got your favorite oldies music on your iPod.

Advertisements
No comments yet

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: